Additives and Reducers

FEATURES 1110 Curable Reducer lowers the viscosity of plastisol inks without affecting the fusing characteristics. This product is non-phthalate. When adding reducers to any plastisol ink, use a minimal amount of reducer to help maintain opacity. The...

FEATURES 1199 Stretch Additive can be easily mixed into Multipurpose, 700 Series, 900 Series or 1100 Series plastisols to produce increased elongation for Lycra, Spandex and other stretch fabric applications. The recommended ratios are: By volume, 2...

FEATURES 220 Puff Additive is a plastisol product formulated to be mixed with International Coatings standard plastisol inks to produce a raised or puff effect. Can be hand stirred into Multipurpose, 700, 7500 and 7600 Series inks. The recommended...

FEATURES 3804 Low Cure Additive lowers the curing or fusion temperatures of most plastisol based inks to less than 300°F (149° C). Use the 3804 Low Cure Additive when printing onto temperature and color sensitive fabrics such as 100% polyester...

FEATURES 3805 Super Stretch Clear is a non-phthalate plastisol ink, which provides exceptional stretch properties.  3805 Super Stretch Clear used as a stretch additive, can increase the elongation properties of other plastisol inks.  3805...

FEATURES 3816 Sentri Clear™ works as a soft clear enhancer that can be mixed with finished colors or concentrates to acheive super-soft prints. 3816 Sentri Clear™ has excellent penetration into fabrics when printing with fine mesh counts...

Use SoftHand to soften and extend an ink.  Add 10%-20% to any 700 or 7600 series ink.  Testing and washing should always be done before starting a production run.   Please see the data sheets below for more details.   SDS TECH DATA...

FEATURES Catalyst is available in 8 ounce containers. The catalyst helps the ink adhere better to hard-to-print fabrics such as nylon.  However, there are also other uses such as adding catalyst to our 3820 Flock Adhesive to promote better...